2 channel High Speed CAN interface; 2 Philips SJA1000 CAN controller, supports CAN specification 2.0B; I/O interface based on Philips TJA1050 CAN transceiver, channels isolated from system logic and from each other; On board termination option for each CAN bus channel; P14 rear I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

Two independent CAN bus controller supporting standard and extended frames according to CAN specification 2.0 part A and B; Physical interface optically isolated CAN High Speed (ISO11898) and modified RS485; Physical Interface optically isolated from CAN controller per channel; Transfer rate 1 Mbit/s maximum, Optional on board 120 Ohms bus line termination; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

Conduction cooled single-width 32 bit PMC module, 6 Channels, independently configurable as standard SSI interface controller with SSI 'Listen only' Mode/ Incremental encoder / General purpose 32 bit counter with reference preload function and various count and control modes; Inputs are isolated and TTL/RS422 compatible; 6 isolated 24 V digital inputs; P14 Back I/O connector; Operating temperature -40°C to +85°C

Four high speed asynchronous /synchronous (including HDLC mode) serial interfaces implemented in FPGA logic; I/O access on rear connector P14; Physical interface (individually programmable per channel): EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; Maximum data rate: 10 Mbit/s (synchronous), 2 Mbit/s (asynchronous), internally or externally provided clock; EIA-232: up to 115.2 kbit/s; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

8 channels of high performance RS232 / RS422 serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422: up to 5.5296 Mbps; Octal UART: Exar XR17D158; I/O Signals of RS232: TxD, RxD, RTS, CTS, GND / RS232 Full Modem: TxD, RxD, RTS, CTS, DTR, DSR, CD, RI, GND / RS422: TxD± , RxD±, GND (TPMC371-11X: 2 Channel RTS±, CTS±); 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to ± 15KV); PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

4 channels of high performance RS232 / RS422 serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422: up to 5.5296 Mbps; Quad UART: Exar XR17D154; I/O Signals of RS232: TxD, RxD, RTS, CTS, GND / RS232 Full Modem: TxD, RxD, RTS, CTS, DTR, DSR, CD, RI, GND / RS422: TxD± , RxD±, GND (TPMC372-11x: 1 Channel RTS±, CTS±); 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to ± 15KV); PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

TPMC375 Conduction Cooled PMC with 8 Channel RS232/RS422/RS485 Programmable Serial Interface 
　

8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to ± 15KV); Operating temperature -40°C to +85°C

4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to ± 15KV); Operating temperature -40°C to +85°C

Conduction Cooled four channel Ethernet interfaces based on Intel 82574IT Controller; Four IEEE 802.3 compliant Gigabit LAN interfaces; Provides 10/100/1000 Mbit/s, half or full-duplex; configurable transmit and receive FIFOs; Network connection via back I/O P14 connector; Status LEDs;PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C